MABC 9% (Mild Acid Bowl Cleaner)

Laticrete Enhancer Pro™ - StoneTech -1 Quart

Shining Powder 2000 Grit - Dupont StoneTech - 10LB

Laticrete Semi Gloss Finishing Sealer - StoneTech - 1 Quart

Laticrete Semi Gloss Finishing Sealer - StoneTech - 1 Gallon

• Two-in-one formula leaves a light sheen and protects against stains

• Easy-to-use, water-based formula

• Interior use Where to Use Slate, saltillo, limestone, travertine and concrete floors

• Not intended for use on glazed, polished, or non-absorbing surfaces, wood floors & decks, showers, countertops, or near pool areas

 

$80.49
In stock
SKU
D14924588

LATICRETE SEMI GLOSS FINISHING SEALER - STONETECH - 1 GALLON

• Two-in-one formula leaves a light sheen and protects against stains

• Easy-to-use, water-based formula

• Interior use Where to Use Slate, saltillo, limestone, travertine and concrete floors

• Not intended for use on glazed, polished, or non-absorbing surfaces, wood floors & decks, showers, countertops, or near pool areas

 

STONETECH® Professional tile and stone care and maintenance products are innovative, easy-to-use solutions to protect and preserve stone against the damaging effects of everyday living. With a complete line of products to protect, clean and transform stone surfaces, LATICRETE® will help ensure the beauty of natural stone and tile countertops, floors, walls and other installations for generations to come.

 Read entire label before using. Use only as directed. Always test in a small inconspicuous area to determine appropriate application method, achievement of desired results, and to ensure good adhesion. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area until foot traffic resumes. Avoid applying in direct sunlight. Surface must be thoroughly clean, dry, and free of any sealers or coatings before application. Application to a dirty or dusty surface will affect adhesion and appearance. High Gloss Finishing Sealer should not be applied to a wet or moist surface. Avoid applying onto surfaces not intended for treatment. For new installations, sealer can be applied as soon as 48–72 hours after grouting. Fresh concrete slabs require a minimum of 28 days to cure before applying the sealer. 1. Liberally apply 2–4 even coats with a natural bristle brush, roller, or paint pad applicator. Do not apply product with a sprayer or sponge. Avoid puddling of liquid during application. Failure to apply a sufficient amount of sealer to the surface may result in an undesirable finish or degradation of the coating. More coats may be applied if desired. 2. Allow 30–45 minutes between coats or until surface is dry to the touch. 3. Surface traffic may begin 12 hours after final application; keep installation dry for a minimum of 12 hours; full cure is achieved in 24–48 hours. 4. Keep surface clean and dry as finished surfaces may become slippery when wet.

 

More Information
Free Shipping No
Manufacturer Laticrete StoneTech
Write Your Own Review
You're reviewing:Laticrete Semi Gloss Finishing Sealer - StoneTech - 1 Gallon